Receive our product catalogue free of charge!
Please click the button to order our free product catalogue.
Hello! How can we help you?
How do I center the Trionic brake ?
If the rear wheel on your Veloped/Walker doesn’t turn free, it could be that the brake is not centered and it rubs against the brake hub (brake surface). By centering the brake, there will be free space between the brake and the brake hub, and the wheel spins free again.
Just follow these simple steps:
Step 1:Locate the top hole in the brake cover that gives you access to the M5 screw that holds the brake, by using a 4mm Allen key.
Step 2:Loosen the screw 2 turns (anti-clockwise).
Loosen the brake screw 2 full turns
Step 3: Pull the brake lever tight and hold it.
Step 4: While holding the brake lever pulled, tighten the brake screw with the 4mm Allen key.
Pull the brake lever and hold it. While holding the brake lever, tighten the brake screw.
Step 5: Test the brake clearance by spinning the wheel and checking that there is no rubbing between the brake and the brake hub.
NOTE:The brake lever in the picture may differ from the brake lever on your Veloped/Walker.
Glad we could help. Thanks for your feedback!
Please give us feedback or ask us over:
- 08-522 100 50
- Chat with us
Or share your feedback directly:
Read and discover more about our premium quality rollators
Want to deepen your knowledge further? Below you will find everything you need to learn all about our Veloped and Walker rollators