Receive our product catalogue free of charge!
Please click the button to order our free product catalogue.
Hello! How can we help you?
How do you replace the brake cable on the Trionic Veloped?
Video showing how you replace the brake cable:
Walker/Rollator Brake Cable Replacement video.
- loosen the screw on the handle
- loosen the screw on the brake lever
- open the screws that hold the handlebar (Easiest to change on one side at a time)
- pull the grab bar forward on the side you loosened and then pull off the handle and brake lever
- remove the wheel
- remove the brake cover
- remove the wire from the brake
- remove the wire from the brake lever
- Mount the wire on the brake handle and thread on the brake handle on the handlebar, and press the handle and attach it to the frame
- mount the wire in the brake and then mount on the brake protection cover
- attach the wheel
- Attach the handle and brake lever
- test the brake and adjust it if necessary, this is done on the part that protrudes from the brake cover. Screw on it with an 8mm wrench to the desired result
Glad we could help. Thanks for your feedback!
Please give us feedback or ask us over:
- 08-522 100 50
- Chat with us
Or share your feedback directly:
Read and discover more about our premium quality rollators
Want to deepen your knowledge further? Below you will find everything you need to learn all about our Veloped and Walker rollators